LATEST GENERATION TECHNOLOGY FOR SUSTAINABLE PROJECTS
Details of locking systems
TechDaal enclosure systems are developed based on rigorous technical detailing, designed to ensure structural stability, controlled airtightness, and long-term correct performance of the building assembly. Each solution is defined layer by layer, using certified and fully compatible materials, each with a clearly assigned role in load transfer, vapour control, and structural protection. The enclosure details integrate the lightweight steel structure, fixing systems, protective layers, and finishes, enabling precise and predictable execution. These solutions are thoroughly documented to support correct on-site implementation and to maintain compliance with current quality and durability requirements.
LATEST GENERATION TECHNOLOGY FOR SUSTAINABLE PROJECTS
TechDaal enclosure systems are developed based on rigorous technical detailing, designed to ensure structural stability, controlled airtightness, and long-term correct performance of the building assembly. Each solution is defined layer by layer, using certified and fully compatible materials, each with a clearly assigned role in load transfer, vapour control, and structural protection. The enclosure details integrate the lightweight steel structure, fixing systems, protective layers, and finishes, enabling precise and predictable execution. These solutions are thoroughly documented to support correct on-site implementation and to maintain compliance with current quality and durability requirements.
FENESTRATION DETAILS
Fenestration fixing detail within lightweight steel wall – horizontal section
1. Interior finish layer: skim coat + washable paint: ~2.5 mm
2. Gypsum plasterboard: 12.5–25 mm
3. Vapour barrier
4. Lightweight steel stud wall, C100 / C150 profiles
5. Mineral wool / cellulose insulation
6. Rigid sheathing board (OSB3, plywood, fibre-cement): min. 12 mm
7. External thermal insulation system (EPS, basalt mineral wool): min. 100 mm
8. Thermal insulation layer (EPS): 50 mm
9. Sealing tape (interior and exterior)
10. Window and door installation foam
11. Window / door frame
12. Glazing unit
13. Reinforced render with fiberglass mesh: ~5 mm
14. Decorative render: ~3 mm
Fenestration fixing detail within lightweight steel wall – vertical section
1. Interior finish layer (skim coat + washable paint): ~2.5 mm
2. Gypsum plasterboard: 12.5–25 mm
3. Vapour barrier
4. Lightweight steel stud wall, C100 / C150 profiles
5. Mineral wool / cellulose insulation
6. Rigid sheathing board (OSB3, plywood, fibre-cement): min. 12 mm
7. External thermal insulation system (EPS, basalt mineral wool): min. 100 mm
8. Thermal insulation layer (EPS): 50 mm
9. Sealing tape (interior and exterior)
10. Window and door installation foam
11. Window / door frame
12. Glazing unit
13. Reinforced render with fiberglass mesh: ~5 mm
14. Decorative render: ~3 mm
15. C-profile lintel reinforcement
16. Window sill with drip edge, adhesively fixed
17. Water-repellent protection layer
Primary fenestration fixing detail – horizontal section
1. Interior finish layer (skim coat + washable paint): ~2.5 mm
2. Gypsum plasterboard: 12.5–25 mm
3. Vapour barrier
4. Lightweight steel stud wall, C100 profiles
5. Thermal insulation within the steel wall cavity
6. Rigid sheathing board (OSB3, plywood, fibre-cement): min. 12 mm
7. External thermal insulation system (EPS, basalt mineral wool): min. 150 mm
8. Thermal insulation layer (EPS, basalt mineral wool)
9. Pre-frame with polymer adhesive and mechanical fixings
10. Fenestration installation foam
11. Fenestration frame
12. Glazing unit
13. Reinforced render with fiberglass mesh: ~5 mm
14. Decorative render: ~3 mm
15. Sealing tape (interior and exterior)
Primary fenestration fixing detail – vertical section
1. Interior finish layer (skim coat + washable paint): ~2.5 mm
2. Gypsum plasterboard: 12.5–25 mm
3. Vapour barrier
4. Lightweight steel stud wall, C100 profiles
5. Thermal insulation within the lightweight steel wall cavity
6. Rigid sheathing board (OSB3, plywood, fibre-cement): min. 12 mm
7. External thermal insulation system (EPS, basalt mineral wool): Tmin = 150 mm
8. Thermal insulation layer (EPS, basalt mineral wool)
9. Pre-frame with polymer adhesive and mechanical fixing
10. Fenestration installation foam
11. Fenestration frame
12. Glazing unit
13. Reinforced render with fiberglass mesh: ~5 mm
14. Decorative render: ~3 mm
15. C-profile lintel stiffening element, lattice beam type
16. Sealing tape (interior and exterior)
Primary fenestration fixing detail – C150 profile wall – horizontal section
1. Interior finish layer (skim coat + washable paint): ~2.5 mm
2. Gypsum plasterboard: 12.5–25 mm
3. Vapour barrier
4. Lightweight steel stud wall, C150 profiles
5. Mineral wool / cellulose insulation
6. Rigid sheathing board (OSB3, plywood, fibre-cement): min. 12 mm
7. External thermal insulation system (EPS, basalt mineral wool): Tmin = 200 mm
8. Thermal insulation layer (EPS, basalt mineral wool)
9. Pre-frame with polymer adhesive and mechanical fixings
10. Fenestration installation foam
11. Fenestration frame
12. Glazing unit
13. Reinforced render with fiberglass mesh: ~5 mm
14. Decorative render: ~3 mm
15. Sealing tape (interior and exterior)
16. Timber frame 40 × 150 mm
Primary fenestration fixing detail – C150 profile wall – vertical section
1. Interior finish layer (skim coat + washable paint): ~2.5 mm
2. Gypsum plasterboard: 12.5–25 mm
3. Vapour barrier
4. Lightweight steel stud wall, C150 profiles
5. Mineral wool / cellulose insulation
6. Rigid sheathing board (OSB3, plywood, fibre-cement): min. 12 mm
7. External thermal insulation system (EPS, basalt mineral wool): Tmin = 150 mm
8. Thermal insulation layer (EPS, basalt mineral wool)
9. Pre-frame with polymer adhesive and mechanical fixings
10. Fenestration installation foam
11. Fenestration frame
12. Glazing unit
13.Reinforced render with fiberglass mesh: ~5 mm
14. Decorative render: ~3 mm
15. C-profile lintel stiffening element, lattice beam type
16. Sealing tape (interior and exterior)
17. Timber frame 40 × 150 mm
WALL INTERSECTION DETAILS
Internal wall intersection – cross junction
1. Interior finish: skim coat + washable paint / adhesive + ceramic tiles
2. Gypsum plasterboard
3. Gypsum plasterboard
4. OSB board
5. Acoustic insulation
6. Mechanical anchor at the bottom track of the wall
7. C-profiles
8. C-profile, wall bottom track
Exterior wall to interior wall intersection
1. Interior finish: skim coat + washable paint / adhesive + ceramic tiles
2. Gypsum plasterboard
3. Gypsum plasterboard
4. OSB board
5. Thermal / acoustic insulation within the lightweight steel wall cavity
6. Mechanical anchor at the bottom track of the wall
7. C-profiles
8. C-profile, wall bottom track
9. Vapour barrier
10. OSB3 board
11. Reinforced render with fiberglass mesh
12. Decorative render
Exterior wall intersection – corner
1. Interior finish: skim coat + washable paint / adhesive + ceramic tiles
2. Gypsum plasterboard
3. Gypsum plasterboard
4. OSB board
5. Thermal / acoustic insulation within the lightweight steel wall cavity
6. Mechanical anchor at the wall bottom track
7. C-profiles
8. C-profile, wall bottom track
9. Vapour barrier
10. OSB3 board
11. Reinforced render with fiberglass mesh
12. Decorative render
Internal wall intersection – corner
1. Interior finish: skim coat + washable paint / adhesive + ceramic tiles
2. Gypsum plasterboard
3. Gypsum plasterboard
4. OSB board
5. Acoustic insulation
6. Mechanical anchor at the wall bottom track
7. C-profiles
8. C-profile, wall bottom track
I WALL – FLOOR SLAB – E WALL DETAIL
Detail ground floor wall – floor slab – upper floor wall intersection
1. Interior finish: skim coat + washable paint / adhesive + ceramic tiles
2. Gypsum plasterboard
3. Gypsum plasterboard
4. OSB board
5. Vapour barrier
6. Thermal / acoustic insulation within the lightweight steel wall cavity
7. Thermal / acoustic insulation within the lattice beam floor structure
8. OSB3 board
9. Extruded polystyrene insulation (XPS)
10. Semi-dry screed
11. Floor finish
12. Underfloor heating circuit
13. Lattice beam made of C-profiles
14. OSB3 board
15. External thermal insulation system
16. Reinforced render with fiberglass mesh
17. Decorative render
ROOF DETAIL | FLAT ROOF WITH PARAPET
Roof detail – terrace with parapet
1. Interior finish: skim coat + washable paint
2. Gypsum plasterboard
3. Gypsum plasterboard
4. OSB board
5. Vapour barrier
6. Thermal / acoustic insulation within the lightweight steel wall cavity
7. Thermal / acoustic insulation within the lattice beam floor structure
8. OSB3 board
9. Tapered polystyrene insulation
10. Waterproofing membrane
11. OSB board
12. Thermal insulation returned over the parapet
13. Metal parapet coping
14. OSB3 board
15. External thermal insulation system
16. Reinforced render with fiberglass mesh
17. Decorative render
RETROPANEL ENCLOSURE DETAIL
Retropanel enclosure detail
1. Interior finish: skim coat + washable paint / adhesive + ceramic tiles
2. Gypsum plasterboard
3. Gypsum plasterboard
4. OSB board
5. Vapour barrier
6. Thermal / acoustic insulation within the lightweight steel wall cavity
7. Thermal / acoustic insulation within the lattice beam floor structure
8. OSB3 board
9. Breather membrane
10. Vertical supports + thermal insulation system
11. Retropanel support layer (boarding)
12. Retropanel-type boards
13. C-profile truss
14. Anti-condensation membrane
VENTILATED FACADE DETAIL
Ventilated facade detail
1. Interior finish: skim coat + washable paint
2. Gypsum plasterboard
3. Gypsum plasterboard
4. OSB board
5. Vapour barrier
6. Thermal / acoustic insulation within the lightweight steel wall cavity
7. Thermal / acoustic insulation within the lattice beam floor structure
8. OSB3 board
9. Tapered polystyrene insulation
10. Waterproofing membrane
11. OSB board
12. Thermal insulation turned over the parapet
13. Metal parapet coping
14. OSB3 board
15. Thermal insulation
16. Ventilated cavity
17. Ventilated facade framework
18. External cladding
19. Breather membrane
CONTACT
Request a personalized offer